01 / Diagnostic

Paint correction, measured.

Correction stages, surface preparation and a protective coating in one documented package. Paint depth in µm and gloss-unit change are recorded before and after.

Coatings are not permanent and do not prevent all scratches, chips or etching. Warranty terms apply.

Detailer measuring paint depth with a gauge on a car hood under studio light
Paint depth readings taken at three points per panel before correction.

02 / Packages

Three correction stages, one coating ladder.

Every row combines paint correction, surface preparation and a protective coating. What changes is the number of stages, the coating chemistry and the aftercare scope. Prices are starting points, confirmed after paint depth and gloss are measured.

Package Correction Surface prep Coating Durability Price from Action
Stage 01 / Finish 1 polishing stage Wash, decontamination, clay Single-layer sealant 12 months ₴18,400 Request quote
Stage 02 / Correct 2 stages, 2 passes Wash, decontamination, clay, panel wipe 9H ceramic, single layer 36 months ₴34,900 Build my package
Stage 03 / Protect 3 stages, 3 passes Two panel wipes, depth map Multilayer ceramic 60 months ₴52,000 Request quote

Chip repair and paint spraying sit outside all three rows. See inclusions and exclusions for the full written scope before booking.

04 / Process

Four stages, from first rinse to coating cure

Every package runs the same rail. What changes is the correction stage count, the coating chemistry, and the aftercare window.

  1. 01

    Wash and decontamination

    Two-bucket hand wash, iron and tar removal, then a clay pass. About 90 minutes. Paint must read clean under inspection light before anything is measured.

    Outcome: a surface that can be gauged without false readings.

  2. 02

    Paint measurement

    Depth readings across 12 panels plus a gloss-unit baseline, logged before work begins. These numbers set the correction stage count for your car.

    Outcome: a written starting point you can hold against the finish.

  3. 03

    Paint correction

    One to three cut and refine stages on a dual-action polisher, with panel checks between passes and depth re-reads on the hardest sections.

    Outcome: defects reduced to the level agreed in the estimate, never polished past the clear coat.

  4. 04

    Coating cure

    Panel wipe, coating application, then 12 to 24 hours of controlled indoor cure. No washing for the first 7 days.

    Outcome: a cured layer with the durability stated on your package sheet.

Compare stage counts and coating durability in the package table

05 / Evidence

Measured change, not a promise.

Drag the divider to compare one panel before and after a two-stage correction with a protective coating. Both readings come from the same panel, taken before wash and again after cure.

Car hood panel with dull, swirled paint before correction
The same car hood panel with clear, corrected paint after coating
Before After
Paint depth118 µm → 112 µm
Gloss units (GU)71 GU → 94 GU
Correction stages2 of 2
Coating cure24 h

Readings vary with panel condition, paint thickness and previous repair work. See how packages are measured.

05 / Warranty & chemistry

What the coating covers, and what it does not.

Every package ships with written terms. The figures below are the standard positions; the signed sheet issued for your vehicle before work starts takes precedence.

  • ChemistrySolvent-based prep layer under a 9H-rated polysiloxane topcoat. No wax or sealant top-up is required.
  • CorrectionOne to three machine stages, each verified with paint depth readings in µm before and after.
  • Cure scheduleDry to touch in 24 hours, no washing for 7 days, full hardness at 30 days.
  • Coating durabilityUp to 3 years on the signature tier, 18 months on mid, 12 months on entry, subject to aftercare.
  • Warranty period36 months signature, 24 months mid, 12 months entry. Transferable only with the annual inspection at the studio.
  • ExcludedChip repair, paint spraying, panel repair, and damage from abrasion, harsh chemicals, or incorrect washing.
  • ExcludedDefects present before work starts. Each is photographed and listed on the intake sheet.

A coating is not permanent and does not prevent all scratches, rock chips, stains, etching, or environmental damage. Coverage is limited to the written terms, exclusions, inspection requirements, and recommended aftercare. Full conditions sit on the packages page.

06 / FAQ

Durability, warranty, and the limits of a coating.

How long protection lasts, what written terms cover, and what every package excludes.

Two to five years, depending on coating chemistry, correction stage, and how the car is parked and washed. Each package states its durability in years, and the annual inspection re-measures paint depth in µm and gloss units.

Full inclusions and limits sit in the warranty and aftercare terms. Questions before booking can go to the studio form.

07Contact

Request an inspection or build a package.

Send the vehicle details and we will confirm a paint-depth inspection slot. Every package combines correction stages, surface preparation and a protective coating.

Compare packages

Warranty coverage is subject to written terms, exclusions, inspection requirements and recommended aftercare. Studio address and phone are listed on the contact page.